Product ID:164 LIQUITEX ARTIST ACRYLIC COLORS IN TUBES & JARS
MSDS Date:04/23/1992
FSC:8010
NIIN:00F037908
MSDS Number: BWKDB

BINNEY AND SMITH INC

1100 CHURCH LANE
EASTON, PA 18044-9010
US

Emergency Phone: 800-272-9652/215-253-6271

Info Phone: 800-272-9652

Preparer: PHILLIP E MOLL

Cage: EO269

BINNEY AND SMITH INC

431 EASTON, PA 18044 US

Telephone: 800-272-9652

Cage: EO269

2-AMINO-2-METHYL-1-PROPANOL

CAS: 124-68-5

RTECS: UA5950000

COATING LESS WATER 1-1.5 LB/GAL

RTECS: 9999999VO

ZINC CHROME COBALT ALUMINATE

CAS: 74665-01-3

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM

1,2-PROPANEDIOL (PROPYLENE GLYCOL)

CAS: 57-55-6

RTECS: TY2000000

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN, EYE &
RESPIRATORY DISORDERS.

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WIPE OFF EXCESS &
FLUSH W/WARM WATER & SOAP. INHALATION: REMOVE TO FRESH AIR & TREAT
SYMPTOMATICALLY. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:>250F
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:SWEEP UP FOR USE/DISPOSAL.

Handling and Storage Precautions:DON'T STORE NEAR EXTREME HEAT. USE
W/ADEQUATE VENTILATION.
Other Precautions:DON'T INHALE DUST/SPRAY FROM AIRBRUSH.

Respiratory Protection:WEAR NIOSH CERTIFIED RESPIRATOR FOR LARGE
QUANTITIES OF PAINT, AIRBRUSHING & SANDING DRIED PRODUCT.
Ventilation:ADEQUATE TO CONTROL FUMES, VAPOR & DUST CONCENTRATIONS.
Eye Protection:SAFETY GLASSES/GOGGLES.
Other Protective Equipment:PROTECTIVE CLOTHING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:>212F
Melt/Freeze Pt:M.P/F.P Text:<32F
Vapor Pres:17-20
Vapor Density:>1
Spec Gravity:1.1-1.6
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:DISPERSES
Appearance and Odor:VISCOUS COLORED LIQUID W/SLIGHT ACRYLATE ODOR.

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:CO & CO2.

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.